In Stock

12/13 in 1 usb tester dc power meter digital voltmeter voltimetro volt meter power bank wattmeter voltage tester doctor detector

Categories: Automobiles & Motorcyles, Tools

Description
Reviews (0)

Description

U96 key button operation instructions:

1. Short Press key button to switch screen

2. Long press key button the screen to flip

3. Quickly double-click key button the power Wh to clear zero

4. Fast three-click capacity mAH to clear zero

5. Fast four-click time to clear zero

Product introduction:

12 in 1 measurement: voltage, current, power, battery capacity, impedance, parameters such as temperature, energy and time,etc. Manganin material: fast charging

Blue Shell Black Screen Backlight USB tester

Transparent Shell Black Screen Backlight USB tester

Technical parameters:

Voltage measuring range: 3.60V ~ 32.5 V Resolution precision: 0.01 V

Current measuring range: 0.00A ~ 5.00 A Resolution precision: 0.01 A

Power cumulative range: 0 ~ 999999 WH Resolution precision: 0.001 Wh

Capacity range : 0 ~ 999999 mAH Resolution precision: 0.001 Ah

Temperature：0 ℃ ~ + 80 ℃ Resolution precision:1 ℃

D+ Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V

D- Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V

Load impedance: 0 ~ 999 ohm Resolution precision: 1 ohm

Power metering range: 0 ~ 299.999 W Resolution precision: 0.001 W

Timing maximum time: 999 H 59 M 59 S Resolution precision: 1 S

Time to refresh: > 500 ms/time > 500 ms/times

Measurement rate: 0.5 times/s

Use large equipment of the same metal manganese bronze sampling resistor

(1.0 mm diameter metal manganese bronze material < 0.05R)

Product size: 65 x 24 x 14 mm

Since the power flow: < 0.003 A （ < 3mA ）

Working temperature: – 10 ~ + 60 ℃

Working humidity: 10 ~ 80 (no doubt)

The pressure of work: 80 ~ 106 kpa

Cumulative capacity range: 0-99999 mah precision: 0.001 Ah (New features or D+ D- Voltage )

Specifications:

Item size:65 * 24 * 14 mm

Net weight: 19g

Package weight: 28g

Color: Black

Display Color: white or black

Packing content:

1 x Digital USB Voltmeter Tester

————————————————————————

Function characteristics:

1) 8192 pixels HD display;

2) D+ D- Voltage Tester

3) Memory power time data such as power;

4) The single monitoring shows charging voltage, current, power, power WH,mAH, charging time and other information;

5) USB is the copper pin and a low resistance in sampling technology, access after almost does not affect the charging speed;

6) Wide voltage from 3.60 V to 32.5 V;

7) Low and lower power since the < 0.003 A （ < 3mA ）

3.60V~32.5V / 0.00A~5.10A / 0 ~ 299.999W / 0 ~ 999999 WH / 0 ~ 999999 mAH / 0℃~+80℃ / 0~999 ohm / 999H 59M 59S / D+ D- Voltage 0.000V ~ 2.999 V / Since the power flow: < 0.003 A

8.When the power is > 0.5W, the time will be calculated!

Important Tips：

1）Backlit the default value is 10 seconds automatically shut down, if you need to close a backlight or normally open backlighting, please in double-click backlit screen button or click the button to adjust, thank you!

2）When the ambient temperature changes or the outside heat conduction to tester causes the current to not return to zero and the display shows 0.01A or 0.02A or otherwise,Please Hold on the key buttion then insert to USB Charger It can make the current temperature of the ambient current zero calibration,After the zero can more accurate measurements.And when in Zero calibration,the output can not have any load current consumption, so usb tester display 0.00A

More introduction:

— Variety of applications —

— Measuring interface more —

Important Tips:

1. Products Shell Color：Transparent or Blue Color Optional

2. LCD Screen Backlight:White/Blue/Black/Orange 4 kind of Backlit Optional

3. Backlight default time is 10S time, through the key button, switch to the BL interface: 10S time interface, double-click or three-click to increase(+) time or decrease(-) time the backlight time ,and the same time backlight switch “BL: OFF(time) ~BL: ON（time）1S ~ 59S range” Increase(+) or three-Click(-) after the reduction, then long press key is a continuous increase in the reduction.To meet the individual needs of users.

BL: 10S→ USB tester default backlight time is 10S, 10S automatically turn off screen brightness

BL: ON→USB tester backlight is on, always on

BL: OFF→USB tester backlight is off, there is no backlight

4.When the power is > 0.5W, the time will be calculated!

— Voltage calibration software technology —

— Current software calibration technology —

— Minimal power consumption ~1mA —

— Fixed load measurement —

— Charging for mobile power measuremen t—

User Application cases:

— Measuring interface more —

FAQ

1. Why does the USB tester show 0.01A or other current when the load is not connected?

A: 1. This situation shows that the 0.01A temperature drift may be caused by the temperature drift current, make sure the USB tester is not connected to any load, and then press the button in the main interface 7 times, you can calibrate the current 0.00A!

2. Why does the USB tester show 0.01A or other current when connected to a load?

A: 1. Our USB test instrument using software calibration technology, in the case of no power, press and hold the USB tester’s key, insert the USB charger, enter the USB tester background, shows 0.00A, long press the key , The screen appears “RESET” to restore the factory settings!

3. How to set the backlight?

A: The general factory settings, set the backlight is turned on is 10s Time, please click the button to switch to the BL: ON interface, press the button for three click consecutive strikes (-) or double-click (+) to set the backlight, there are three modes to choose from, you can set the BL : ON (backlight open), BL: OFF (backlight off), BL: 1S-59S (set the 1S-59S automatically turn off the backlight time)

BL: 10S USB tester default backlight time is 10S, 10S automatically turn off screen brightness

BL: ON USB tester backlight is on, always on

BL: OFF USB tester backlight is off, there is no backlight

U96 key button operation instructions:

1. Short Press key button to switch screen

2. Long press key button the screen to flip

3. Quickly double-click key button the power Wh to clear zero

4. Fast three-click capacity mAH to clear zero

5. Fast four-click time to clear zero

Product introduction:

12 in 1 measurement: voltage, current, power, battery capacity, impedance, parameters such as temperature, energy and time,etc. Manganin material: fast charging

Blue Shell Black Screen Backlight USB tester

Transparent Shell Black Screen Backlight USB tester

Technical parameters:

Voltage measuring range: 3.60V ~ 32.5 V Resolution precision: 0.01 V

Current measuring range: 0.00A ~ 5.00 A Resolution precision: 0.01 A

Power cumulative range: 0 ~ 999999 WH Resolution precision: 0.001 Wh

Capacity range : 0 ~ 999999 mAH Resolution precision: 0.001 Ah

Temperature：0 ℃ ~ + 80 ℃ Resolution precision:1 ℃

D+ Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V

D- Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V

Load impedance: 0 ~ 999 ohm Resolution precision: 1 ohm

Power metering range: 0 ~ 299.999 W Resolution precision: 0.001 W

Timing maximum time: 999 H 59 M 59 S Resolution precision: 1 S

Time to refresh: > 500 ms/time > 500 ms/times

Measurement rate: 0.5 times/s

Use large equipment of the same metal manganese bronze sampling resistor

(1.0 mm diameter metal manganese bronze material < 0.05R)

Product size: 65 x 24 x 14 mm

Since the power flow: < 0.003 A （ < 3mA ）

Working temperature: – 10 ~ + 60 ℃

Working humidity: 10 ~ 80 (no doubt)

The pressure of work: 80 ~ 106 kpa

Cumulative capacity range: 0-99999 mah precision: 0.001 Ah (New features or D+ D- Voltage )

Specifications:

Item size:65 * 24 * 14 mm

Net weight: 19g

Package weight: 28g

Color: Black

Display Color: white or black

Packing content:

1 x Digital USB Voltmeter Tester

————————————————————————

Function characteristics:

1) 8192 pixels HD display;

2) D+ D- Voltage Tester

3) Memory power time data such as power;

4) The single monitoring shows charging voltage, current, power, power WH,mAH, charging time and other information;

5) USB is the copper pin and a low resistance in sampling technology, access after almost does not affect the charging speed;

6) Wide voltage from 3.60 V to 32.5 V;

7) Low and lower power since the < 0.003 A （ < 3mA ）

3.60V~32.5V / 0.00A~5.10A / 0 ~ 299.999W / 0 ~ 999999 WH / 0 ~ 999999 mAH / 0℃~+80℃ / 0~999 ohm / 999H 59M 59S / D+ D- Voltage 0.000V ~ 2.999 V / Since the power flow: < 0.003 A

8.When the power is > 0.5W, the time will be calculated!

Important Tips：

More introduction:

— Variety of applications —

— Measuring interface more —

Important Tips:

1. Products Shell Color：Transparent or Blue Color Optional

2. LCD Screen Backlight:White/Blue/Black/Orange 4 kind of Backlit Optional

3. Backlight default time is 10S time, through the key button, switch to the BL interface: 10S time interface, double-click or three-click to increase(+) time or decrease(-) time the backlight time ,and the same time backlight switch “BL: OFF(time) ~BL: ON（time）1S ~ 59S range” Increase(+) or three-Click(-) after the reduction, then long press key is a continuous increase in the reduction.To meet the individual needs of users.

BL: 10S→ USB tester default backlight time is 10S, 10S automatically turn off screen brightness

BL: ON→USB tester backlight is on, always on

BL: OFF→USB tester backlight is off, there is no backlight

4.When the power is > 0.5W, the time will be calculated!

— Voltage calibration software technology —

— Current software calibration technology —

— Minimal power consumption ~1mA —

— Fixed load measurement —

— Charging for mobile power measuremen t—

User Application cases:

— Measuring interface more —

FAQ

1. Why does the USB tester show 0.01A or other current when the load is not connected?

2. Why does the USB tester show 0.01A or other current when connected to a load?

3. How to set the backlight?

BL: 10S USB tester default backlight time is 10S, 10S automatically turn off screen brightness

BL: ON USB tester backlight is on, always on

BL: OFF USB tester backlight is off, there is no backlight

Reviews

There are no reviews yet.

Be the first to review “12/13 in 1 usb tester dc power meter digital voltmeter voltimetro volt meter power bank wattmeter voltage tester doctor detector”

You must be logged in to post a review.

Quick Comparison

Settings	12/13 in 1 usb tester dc power meter digital voltmeter voltimetro volt meter power bank wattmeter voltage tester doctor detector remove	ANENG VC1010 Digital AC/DC Voltage Detectors Smart Non-Contact Tester Pen Meter 12-1000V Current Electric Sensor Test Pencil remove	WHDZ DT-830D Mini Digital Multimeter with Buzzer Overload protection Safety Voltage Ampere Ohm Tester Probe DC AC LCD Black remove	BSA British Motorcycle Plaque Vintage Metal / Tin Sign - Red, Yellow remove	2020 High Quality 12-50mm HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy HOT Drill Bits сверла remove	Norton British Motorcycle Plaque Vintage Metal / Tin Sign remove
Name	12/13 in 1 usb tester dc power meter digital voltmeter voltimetro volt meter power bank wattmeter voltage tester doctor detector remove	ANENG VC1010 Digital AC/DC Voltage Detectors Smart Non-Contact Tester Pen Meter 12-1000V Current Electric Sensor Test Pencil remove	WHDZ DT-830D Mini Digital Multimeter with Buzzer Overload protection Safety Voltage Ampere Ohm Tester Probe DC AC LCD Black remove	BSA British Motorcycle Plaque Vintage Metal / Tin Sign - Red, Yellow remove	2020 High Quality 12-50mm HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy HOT Drill Bits сверла remove	Norton British Motorcycle Plaque Vintage Metal / Tin Sign remove
Image
SKU
Rating
Price				$39.99		$39.99
Stock
Availability
Add to cart	Read more	Read more	Read more	Add to cart	Read more	Add to cart
Description
Content	U96 key button operation instructions: 1. Short Press key button to switch screen 2. Long press key button the screen to flip 3. Quickly double-click key button the power Wh to clear zero 4. Fast three-click capacity mAH to clear zero 5. Fast four-click time to clear zero Product introduction: 12 in 1 measurement: voltage, current, power, battery capacity, impedance, parameters such as temperature, energy and time,etc. Manganin material: fast charging Blue Shell Black Screen Backlight USB tester Transparent Shell Black Screen Backlight USB tester Technical parameters: Voltage measuring range: 3.60V ~ 32.5 V Resolution precision: 0.01 V Current measuring range: 0.00A ~ 5.00 A Resolution precision: 0.01 A Power cumulative range: 0 ~ 999999 WH Resolution precision: 0.001 Wh Capacity range : 0 ~ 999999 mAH Resolution precision: 0.001 Ah Temperature：0 ℃ ~ + 80 ℃ Resolution precision:1 ℃ D+ Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V D- Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V Load impedance: 0 ~ 999 ohm Resolution precision: 1 ohm Power metering range: 0 ~ 299.999 W Resolution precision: 0.001 W Timing maximum time: 999 H 59 M 59 S Resolution precision: 1 S Time to refresh: > 500 ms/time > 500 ms/times Measurement rate: 0.5 times/s Use large equipment of the same metal manganese bronze sampling resistor (1.0 mm diameter metal manganese bronze material < 0.05R) Product size: 65 x 24 x 14 mm Since the power flow: < 0.003 A （ < 3mA ） Working temperature: - 10 ~ + 60 ℃ Working humidity: 10 ~ 80 (no doubt) The pressure of work: 80 ~ 106 kpa Cumulative capacity range: 0-99999 mah precision: 0.001 Ah (New features or D+ D- Voltage ) Specifications: Item size:65 * 24 * 14 mm Net weight: 19g Package weight: 28g Color: Black Display Color: white or black Packing content: 1 x Digital USB Voltmeter Tester ------------------------------------------------------------------------ Function characteristics: 1) 8192 pixels HD display; 2) D+ D- Voltage Tester 3) Memory power time data such as power; 4) The single monitoring shows charging voltage, current, power, power WH,mAH, charging time and other information; 5) USB is the copper pin and a low resistance in sampling technology, access after almost does not affect the charging speed; 6) Wide voltage from 3.60 V to 32.5 V; 7) Low and lower power since the < 0.003 A （ < 3mA ） 3.60V~32.5V / 0.00A~5.10A / 0 ~ 299.999W / 0 ~ 999999 WH / 0 ~ 999999 mAH / 0℃~+80℃ / 0~999 ohm / 999H 59M 59S / D+ D- Voltage 0.000V ~ 2.999 V / Since the power flow: < 0.003 A 8.When the power is > 0.5W, the time will be calculated! Important Tips： 1）Backlit the default value is 10 seconds automatically shut down, if you need to close a backlight or normally open backlighting, please in double-click backlit screen button or click the button to adjust, thank you! 2）When the ambient temperature changes or the outside heat conduction to tester causes the current to not return to zero and the display shows 0.01A or 0.02A or otherwise,Please Hold on the key buttion then insert to USB Charger It can make the current temperature of the ambient current zero calibration,After the zero can more accurate measurements.And when in Zero calibration,the output can not have any load current consumption, so usb tester display 0.00A More introduction: --- Variety of applications --- --- Measuring interface more --- Important Tips: 1. Products Shell Color：Transparent or Blue Color Optional 2. LCD Screen Backlight:White/Blue/Black/Orange 4 kind of Backlit Optional 3. Backlight default time is 10S time, through the key button, switch to the BL interface: 10S time interface, double-click or three-click to increase(+) time or decrease(-) time the backlight time ,and the same time backlight switch "BL: OFF(time) ~BL: ON（time）1S ~ 59S range" Increase(+) or three-Click(-) after the reduction, then long press key is a continuous increase in the reduction.To meet the individual needs of users. BL: 10S→ USB tester default backlight time is 10S, 10S automatically turn off screen brightness BL: ON→USB tester backlight is on, always on BL: OFF→USB tester backlight is off, there is no backlight 4.When the power is > 0.5W, the time will be calculated! --- Voltage calibration software technology --- --- Current software calibration technology --- --- Minimal power consumption ~1mA --- --- Fixed load measurement --- --- Charging for mobile power measuremen t--- User Application cases: --- Measuring interface more --- --- Measuring interface more --- FAQ 1. Why does the USB tester show 0.01A or other current when the load is not connected? A: 1. This situation shows that the 0.01A temperature drift may be caused by the temperature drift current, make sure the USB tester is not connected to any load, and then press the button in the main interface 7 times, you can calibrate the current 0.00A! 2. Why does the USB tester show 0.01A or other current when connected to a load? A: 1. Our USB test instrument using software calibration technology, in the case of no power, press and hold the USB tester's key, insert the USB charger, enter the USB tester background, shows 0.00A, long press the key , The screen appears "RESET" to restore the factory settings! 3. How to set the backlight? A: The general factory settings, set the backlight is turned on is 10s Time, please click the button to switch to the BL: ON interface, press the button for three click consecutive strikes (-) or double-click (+) to set the backlight, there are three modes to choose from, you can set the BL : ON (backlight open), BL: OFF (backlight off), BL: 1S-59S (set the 1S-59S automatically turn off the backlight time) BL: 10S USB tester default backlight time is 10S, 10S automatically turn off screen brightness BL: ON USB tester backlight is on, always on BL: OFF USB tester backlight is off, there is no backlight U96 key button operation instructions: 1. Short Press key button to switch screen 2. Long press key button the screen to flip 3. Quickly double-click key button the power Wh to clear zero 4. Fast three-click capacity mAH to clear zero 5. Fast four-click time to clear zero Product introduction: 12 in 1 measurement: voltage, current, power, battery capacity, impedance, parameters such as temperature, energy and time,etc. Manganin material: fast charging Blue Shell Black Screen Backlight USB tester Transparent Shell Black Screen Backlight USB tester Technical parameters: Voltage measuring range: 3.60V ~ 32.5 V Resolution precision: 0.01 V Current measuring range: 0.00A ~ 5.00 A Resolution precision: 0.01 A Power cumulative range: 0 ~ 999999 WH Resolution precision: 0.001 Wh Capacity range : 0 ~ 999999 mAH Resolution precision: 0.001 Ah Temperature：0 ℃ ~ + 80 ℃ Resolution precision:1 ℃ D+ Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V D- Voltage : 0.000V ~ 2.999 V Resolution precision: 0.001 V Load impedance: 0 ~ 999 ohm Resolution precision: 1 ohm Power metering range: 0 ~ 299.999 W Resolution precision: 0.001 W Timing maximum time: 999 H 59 M 59 S Resolution precision: 1 S Time to refresh: > 500 ms/time > 500 ms/times Measurement rate: 0.5 times/s Use large equipment of the same metal manganese bronze sampling resistor (1.0 mm diameter metal manganese bronze material < 0.05R) Product size: 65 x 24 x 14 mm Since the power flow: < 0.003 A （ < 3mA ） Working temperature: - 10 ~ + 60 ℃ Working humidity: 10 ~ 80 (no doubt) The pressure of work: 80 ~ 106 kpa Cumulative capacity range: 0-99999 mah precision: 0.001 Ah (New features or D+ D- Voltage ) Specifications: Item size:65 * 24 * 14 mm Net weight: 19g Package weight: 28g Color: Black Display Color: white or black Packing content: 1 x Digital USB Voltmeter Tester ------------------------------------------------------------------------ Function characteristics: 1) 8192 pixels HD display; 2) D+ D- Voltage Tester 3) Memory power time data such as power; 4) The single monitoring shows charging voltage, current, power, power WH,mAH, charging time and other information; 5) USB is the copper pin and a low resistance in sampling technology, access after almost does not affect the charging speed; 6) Wide voltage from 3.60 V to 32.5 V; 7) Low and lower power since the < 0.003 A （ < 3mA ） 3.60V~32.5V / 0.00A~5.10A / 0 ~ 299.999W / 0 ~ 999999 WH / 0 ~ 999999 mAH / 0℃~+80℃ / 0~999 ohm / 999H 59M 59S / D+ D- Voltage 0.000V ~ 2.999 V / Since the power flow: < 0.003 A 8.When the power is > 0.5W, the time will be calculated! Important Tips： 1）Backlit the default value is 10 seconds automatically shut down, if you need to close a backlight or normally open backlighting, please in double-click backlit screen button or click the button to adjust, thank you! 2）When the ambient temperature changes or the outside heat conduction to tester causes the current to not return to zero and the display shows 0.01A or 0.02A or otherwise,Please Hold on the key buttion then insert to USB Charger It can make the current temperature of the ambient current zero calibration,After the zero can more accurate measurements.And when in Zero calibration,the output can not have any load current consumption, so usb tester display 0.00A More introduction: --- Variety of applications --- --- Measuring interface more --- Important Tips: 1. Products Shell Color：Transparent or Blue Color Optional 2. LCD Screen Backlight:White/Blue/Black/Orange 4 kind of Backlit Optional 3. Backlight default time is 10S time, through the key button, switch to the BL interface: 10S time interface, double-click or three-click to increase(+) time or decrease(-) time the backlight time ,and the same time backlight switch "BL: OFF(time) ~BL: ON（time）1S ~ 59S range" Increase(+) or three-Click(-) after the reduction, then long press key is a continuous increase in the reduction.To meet the individual needs of users. BL: 10S→ USB tester default backlight time is 10S, 10S automatically turn off screen brightness BL: ON→USB tester backlight is on, always on BL: OFF→USB tester backlight is off, there is no backlight 4.When the power is > 0.5W, the time will be calculated! --- Voltage calibration software technology --- --- Current software calibration technology --- --- Minimal power consumption ~1mA --- --- Fixed load measurement --- --- Charging for mobile power measuremen t--- User Application cases: --- Measuring interface more --- --- Measuring interface more --- FAQ 1. Why does the USB tester show 0.01A or other current when the load is not connected? A: 1. This situation shows that the 0.01A temperature drift may be caused by the temperature drift current, make sure the USB tester is not connected to any load, and then press the button in the main interface 7 times, you can calibrate the current 0.00A! 2. Why does the USB tester show 0.01A or other current when connected to a load? A: 1. Our USB test instrument using software calibration technology, in the case of no power, press and hold the USB tester's key, insert the USB charger, enter the USB tester background, shows 0.00A, long press the key , The screen appears "RESET" to restore the factory settings! 3. How to set the backlight? A: The general factory settings, set the backlight is turned on is 10s Time, please click the button to switch to the BL: ON interface, press the button for three click consecutive strikes (-) or double-click (+) to set the backlight, there are three modes to choose from, you can set the BL : ON (backlight open), BL: OFF (backlight off), BL: 1S-59S (set the 1S-59S automatically turn off the backlight time) BL: 10S USB tester default backlight time is 10S, 10S automatically turn off screen brightness BL: ON USB tester backlight is on, always on BL: OFF USB tester backlight is off, there is no backlight	ANENG VD1010 digital voltage detector Non-contact Pen voltmeter Intelligent Alarm meter ac voltmeter tester auto tachometer Features: AC Voltage: 12V -1000V Frequency: 50Hz/60Hz Alarm Mode: Sound/Light/Analog Display: LCD Display Screen Flashlight: Yes Shape Of Probe: Flat Low Battery Indicator: Yes Live Wire And Zero Line: Sound /Light/LCD Analog Display Non-Contact Sensitivity: Adjustable Auto Power-Off: Automatically shut down when there is no induction or operation for 3 minutes. Powered By: 2Pcs x AAA Batter(Not Included) Specification: Material: ABS Type: Non-Contact AC Voltage Detector Color: Shown as pictures Size: 20 x 6 x 6cm(7.87 x 2.36 x 2.36in) Quantity: 1 Pc Package includes: 1 x Non-Contact AC Voltage Detector(Battery is not included.) 1 x User Manual Note: 1. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!	Factory Direct WHDZ Brand DT-830D Digital Multimeter with Buzzer Overload Protection Function Safety Voltage Ampere Ohm Meter Test Probe DC AC LCD WHDZ-TOP Quality 100% Original From TOP 10 Multimeter Manufacturer In China. Highest Cost-Effective Multimeter Characteristics Simple and easy, suitable for beginners With double fuse, safe and reliable Technology features DCV: 200m-2000m-20-200-1000V ±0.5% ACV: 200-750V ±1.0% DCA: 20u-2000u-20m-200m-10A ±1.8% Resistance: 200-2000-20K-200K-2000KΩ ±1.0% General description LCD size: 49x16mm Max display: 1999 Diode test: yes Transistor test: yes Continuity buzzer test: Yes (Other Low price product DT830B is without buzzer) Safety ensure:Overload protection function(Other Low price product without this function) Square wave output:: yes Power supply: one 9V 6F22 battery Product size: 125×70×29mm Product weight:about 128g Standard accessories: meter, test lead, multi-function socket, manual, (Without Battery) . CLICK HERE TO CHOOSE SAME TYPE WITH YELLOW COLOR 100% High quality component to ensure high quality performance also durable multimeter as below disassembly picture.	BSA British Motorcycle Plaque Vintage Metal / Tin Sign for Home, Bar, Pub, Garage, Workshop, Collectables. Nice decorative Wall Art. Size: 30 x 20 cm Return is not accepted for this item.	Drill Bit ,Drill Bits,Сверло 2020 High Quality 12-50mm HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy HOT Features: 100% brand new and high quality and professional Cuts quickly, precise holes in Steel, Stainless Steel,iron, Copper, Brass, Aluminum, Fiberglass, Formica And Other Laminates In Seconds Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc. Can be used as car bus truck parking sensor radar system drilling hole Provide 27 kinds of hole saw ,meet your professional needs Specification: Size (Outside dia.) : 12/13/14/15/16/17/18/19/20/21/22/23/24/25/26/27/28/30/32/35/36/38/40/42/45/48/50 mm Material:HSS Package include: 1 pc HSS Drill Bit Hole Saw Set	Norton British Motorcycle Plaque Vintage Metal / Tin Sign for Home, Bar, Pub, Garage, Workshop, Collectables. Nice decorative Wall Art. Size: 30 x 20 cm Return is not accepted for this item.
Weight
Dimensions	N/A	N/A	N/A	N/A	N/A	N/A
Additional information